TOUGH COAT
The best topcoats for lighter colours are our water-based non-yellowingΒ Tough Coat in Matte or Gloss, or ourΒ Ultra Guard in Flat and Satin. Our formulation will not yellow your whites.Β Trying to decide if this top coat is right for you? ThisΒ complete top coat guideΒ can help you decide.
Perfect for those high traffic surfaces such as table tops.Β Our non-yellowing water-based wipe on sealer, is easily applied with aΒ Staalmeester RollerΒ or anΒ Applicator SpongeΒ and dries to a matte finish. 500ml covers about 75 sq.ft (7m2). We recommend your applicator sponge be slightly humid. No water should be evident. Clean up is easy with soap and warm water. Be sure to gently roll your Tough Coatβ’ in the container prior to using it as the matting agent and other ingredients may settle to the bottom. Do not shake vigorously as thisΒ will cause air bubbles in your piece that are difficult to remove once applied.
This clear non-yellowing water-based coating is quick drying. Apply very thin coats evenly from end to end to prevent streaks. Add extender to delay drying time if humidity is low.
SFOΒ is recommended over dark colours as it wonβt go cloudy, sometimes if the Tough Coat is applied too thick it may go cloudy. You can instead use our Ultra Guard on both light and dark colours.
Looking to create a piece with a high gloss finish that shines? Look no further, you can now achieve this look using ourΒ Gloss Tough Coat Wipe-On PolyΒ fromΒ Fusionβ’.
Fun tip! You can also tint this top coat with our paint or metallics for a fun effect! InstantΒ shimmer topcoat.
